Grand Cherokee WK2 · Limited EcoDiesel

WK2 Command

No adapterNo frames

Waiting for CANable

Gauges show a dash until a real CAN frame is decoded. There is no demo loop. Pair the two CANables in Chrome, assign CAN-C (500 k) and CAN-IHS (125 k), then leave this page open — they reconnect automatically.

—

RPM

—

km/h

—

Boost · kPa

Coolant

—

Oil

—

Fuel

—

Pedal—

Throttle—

Oil press
—
DPF
—
Soot
—
Battery
—
Ignition
—
Doors
—

Climate

Read from CAN-IHS — no simulated setpoints

Cabin

—

Outside

—

Driver

—

Passenger

—

Blower

—

Mode

—

A/C

—

Air

—

Decoded

0 fps · 0 frames

No decoded signals yet. Gauges stay blank until a matching CAN ID arrives.

Raw frames

True bus traffic

Waiting for the first frame from a CANable.

CANable

Auto-connects to any CANable this browser has already allowed. Stock firmware uses serial/slcan; candleLight uses WebUSB. Listen-only by default — the bus is never simulated.

No adapters yet.

Listen-onlyPoll OBD PIDsMetric

IHS bitrate

After changing bitrate or listen-only, unplug/replug or tap Connect so the adapter restarts on the new mode. CAN-C stays 500 kbit/s.